| Need trunk design help please | |
|
+5Alan TeamSpead-Kenny F3M4 BODEAN basscort11 9 posters |
Author | Message |
---|
basscort11 Above Average Contributor
Number of posts : 554 Age : 36 Location : dallas, texas Registration date : 2011-01-09
| Subject: Need trunk design help please Tue Sep 20, 2011 1:17 am | |
| ok so my buddy has a late 90s model camry. im trying to fix his setup to be louder since he messed the box up (accidently tuned to 42 htz with 13 inches of port per cube)
Equipment: DD9515 and crossfire vr4000d. ran at 2 ohm
he has max dims 15 tall, 16 deep and 40 wide.
since i cant do sub and port foward i was thinking sub up and 6" aero to the passenger side? or sub foward port foward with the box slid back to the trunk and it fire around the amps and batts?
also on the box i was thinking 3 cubes with 60 inches of port for slot and 3 cubes with a 6" aero (9.42" per cube)
anyone have any input as to which one would be louder and/or work better, this will be a daily not a numbers car so tuning will be about 34-38 htz. | |
|
| |
BODEAN Basic Contributor
Number of posts : 399 Age : 49 Location : West Point, MS Registration date : 2011-08-21
| Subject: Re: Need trunk design help please Tue Sep 20, 2011 7:41 am | |
| Had a maxima once wit same issues. Had three 12s in it fired to front Three piece box. took rear deck speakers out, left the covers in the deck. Fired two 6" round ports into the covers. Dont know if camry has them , but i took out the springs that hold up the trunk, gave me four or five more inches of height.Not hard to fab up some gas struts to hold it up.
| |
|
| |
basscort11 Above Average Contributor
Number of posts : 554 Age : 36 Location : dallas, texas Registration date : 2011-01-09
| Subject: Re: Need trunk design help please Tue Sep 20, 2011 12:45 pm | |
| hes keeping the rear speakers and the height cannot be changed with the struts as he doesnt have them in the way on his car. anyone else? | |
|
| |
F3M4 Basic Contributor
Number of posts : 423 Age : 33 Location : Baton Rouge Registration date : 2010-06-10
| Subject: Re: Need trunk design help please Tue Sep 20, 2011 12:49 pm | |
| Just do sub up and fire as big an aero as you can fit into the corner, you can play around with the sub fireing to get it as loud as you can | |
|
| |
TeamSpead-Kenny Advanced Contributor
Number of posts : 2194 Age : 40 Location : Chalmette Louisiana Registration date : 2007-07-01
| Subject: Re: Need trunk design help please Tue Sep 20, 2011 1:03 pm | |
| | |
|
| |
Alan Thats a Lot of Posts!
Number of posts : 3897 Age : 44 Location : Watson Louisiana Registration date : 2008-02-05
| Subject: Re: Need trunk design help please Tue Sep 20, 2011 1:20 pm | |
| that is no where near the measurements he mentioned... | |
|
| |
F3M4 Basic Contributor
Number of posts : 423 Age : 33 Location : Baton Rouge Registration date : 2010-06-10
| Subject: Re: Need trunk design help please Tue Sep 20, 2011 1:25 pm | |
| and we're still waiting on your guy with the tens... | |
|
| |
basscort11 Above Average Contributor
Number of posts : 554 Age : 36 Location : dallas, texas Registration date : 2011-01-09
| Subject: Re: Need trunk design help please Tue Sep 20, 2011 2:32 pm | |
| yea thanks alan. that box above is cool but wil not work with the design i got. so no one has answered my question yet. sub port foward or sub up port side (aero)
F3M4 actually u did have a decent response. thanks | |
|
| |
F3M4 Basic Contributor
Number of posts : 423 Age : 33 Location : Baton Rouge Registration date : 2010-06-10
| Subject: Re: Need trunk design help please Tue Sep 20, 2011 7:08 pm | |
| You could always angle the baffle too... | |
|
| |
basscort11 Above Average Contributor
Number of posts : 554 Age : 36 Location : dallas, texas Registration date : 2011-01-09
| Subject: Re: Need trunk design help please Tue Sep 20, 2011 7:11 pm | |
| true. heres what i came up with let me know what you guys think
32 wide x15 deep x16 tall. sub back port to the side 1 6" aero firing to the passenger side. (15 inches long sub mounted as far to the driver side as possible facing back.
that puts it about 3 cubes tuned to about 36 htz if im not mistaken. | |
|
| |
sanman I own this joint!
Number of posts : 12087 Age : 52 Location : shelbyville Registration date : 2007-06-23
| Subject: Re: Need trunk design help please Tue Sep 20, 2011 7:30 pm | |
| thats not terry's box is it | |
|
| |
basscort11 Above Average Contributor
Number of posts : 554 Age : 36 Location : dallas, texas Registration date : 2011-01-09
| Subject: Re: Need trunk design help please Tue Sep 20, 2011 7:55 pm | |
| | |
|
| |
sanman I own this joint!
Number of posts : 12087 Age : 52 Location : shelbyville Registration date : 2007-06-23
| Subject: Re: Need trunk design help please Tue Sep 20, 2011 8:12 pm | |
| to kenny i watched the vid of broks doing 159 outlaw style, and looked like a bp design to me with a 10" port | |
|
| |
Moparbass28 Thats a Lot of Posts!
Number of posts : 3541 Age : 49 Location : Wichita, Ks Registration date : 2007-06-23
| Subject: Re: Need trunk design help please Wed Sep 21, 2011 6:14 am | |
| 2 x 15 forward and port in the middle was his finals box. | |
|
| |
LEN671 Newbie
Number of posts : 19 Age : 40 Location : FROM GUAM, BUT IN SAN ANTONIO, TEXAS FOR TREATMENT FOR MY INJURIES SUFFERED IN IRAQ AND AFGHANISTAN IN 2007. Registration date : 2011-09-14
| Subject: Re: Need trunk design help please Wed Sep 21, 2011 6:53 am | |
| Basscort, I would fire the Port to the Driver's Side of the trunk instead of the passenger side. I have my port firing to the driver's side and it sounds pretty good for daily and also you could put up numbers with it, if you ever decide to meter it. | |
|
| |
F3M4 Basic Contributor
Number of posts : 423 Age : 33 Location : Baton Rouge Registration date : 2010-06-10
| Subject: Re: Need trunk design help please Wed Sep 21, 2011 6:57 am | |
| Be sure to pull the trim in the trunk and make sure theres no vents, mine had a huge vent in the passenger corner.
| |
|
| |
chrisfish I own this joint!
Number of posts : 6521 Age : 54 Location : Silt Colorado Registration date : 2009-05-16
| Subject: Re: Need trunk design help please Wed Sep 21, 2011 7:50 am | |
| | |
|
| |
Alan Thats a Lot of Posts!
Number of posts : 3897 Age : 44 Location : Watson Louisiana Registration date : 2008-02-05
| Subject: Re: Need trunk design help please Wed Sep 21, 2011 5:00 pm | |
| - sanman wrote:
- thats not terry's box is it
thats one he tried.. should of been about at 56ish in the kick with 5400w 54.4 legal . and you are right about what he ended up using.. | |
|
| |
basscort11 Above Average Contributor
Number of posts : 554 Age : 36 Location : dallas, texas Registration date : 2011-01-09
| Subject: Re: Need trunk design help please Thu Sep 22, 2011 7:42 am | |
| Ok well he built the box and he said it sounds louder than anything he has had so I guess he's happy so I'm happy. Preciate the help guys | |
|
| |
sanman I own this joint!
Number of posts : 12087 Age : 52 Location : shelbyville Registration date : 2007-06-23
| Subject: Re: Need trunk design help please Thu Sep 22, 2011 9:22 pm | |
| | |
|
| |
TeamSpead-Kenny Advanced Contributor
Number of posts : 2194 Age : 40 Location : Chalmette Louisiana Registration date : 2007-07-01
| Subject: Re: Need trunk design help please Fri Sep 23, 2011 7:15 am | |
| | |
|
| |
Alan Thats a Lot of Posts!
Number of posts : 3897 Age : 44 Location : Watson Louisiana Registration date : 2008-02-05
| Subject: Re: Need trunk design help please Fri Sep 23, 2011 10:15 am | |
| is this the show off terrys boxes thread lol .. that box works good.. i guess | |
|
| |
Sponsored content
| Subject: Re: Need trunk design help please | |
| |
|
| |
| Need trunk design help please | |
|