2 MA Audio HK2000D's strapped on 2 HK15d2's. Any good?

Novice Contributor Number of posts: 51 Age: 28 Registration date: 2008-01-29

I've got the 15's. Just curious of any opinions on MA's line of amps. I'm on a slight budget so the HK4000 and 10K are no go's. Will 2 HK2000D's push those subs much? Cause I had 1 DB pd2000 before and it didn't have enough juice to do anything destructive with the subs. I want to be LOUD..

Novice Contributor Number of posts: 51 Registration date: 2007-06-24

the MA amps love to eat batteries. i would honestly tell you to hold off and make sure that you have enough battery to go with a bigger amp so when you are ready to "cause distruction" you dont smoke your amp in the 1st 10 min due to low voltage.

slab wrote:

the MA amps love to eat batteries. i would honestly tell you to hold off and make sure that you have enough battery to go with a bigger amp so when you are ready to "cause distruction" you dont smoke your amp in the 1st 10 min due to low voltage.

i agree ma amps love to eat batteries. also ma audio loves 17 volts that is where they really start coming to life.

Novice Contributor Number of posts: 51 Age: 28 Registration date: 2008-01-29

K so a 180 high output with a northstar NsB125 should be straight, right?

possible.

i am running 4 ma xl12's on one ma 802 sx 4400, with a ohio 180 with external reg adjusted to 17v running 1 kinetik 16v and i have 3 more on the way. with one 16v and the alt everytime i hit i drop to 11.4v, but i am running at .25ohms

my 1 ma 4k with 15 ...16v bats dropped from 17.8 to 15.5 in a few seconds .... very hungry

The_Rowlands wrote:

my 1 ma 4k with 15 ...16v bats dropped from 17.8 to 15.5 in a few seconds .... very hungry

yeah that is what i am affraid of. i am not sure i'll have enough juice to keep my it up there. i know one thing going from a 12v to 16v setup on the 4400 bumped me up 3 db. i was dropping to 8v as soon as i burped it to 11.4v on the 16v at first burp.

bigbass140 wrote:

possible.

i am running 4 ma xl12's on one ma 802 sx 4400, with a ohio 180 with external reg adjusted to 17v running 1 kinetik 16v and i have 3 more on the way. with one 16v and the alt everytime i hit i drop to 11.4v, but i am running at .25ohms

Good to know they will take .25 ohms. We are running an 802SX as well. Our set up was droppping to 11V very quickly on burps at only a 1 ohm load with six batteries. They are really hungry but do put out a ton of power. cheers

Lilredtiva wrote:

bigbass140 wrote:

possible.

i am running 4 ma xl12's on one ma 802 sx 4400, with a ohio 180 with external reg adjusted to 17v running 1 kinetik 16v and i have 3 more on the way. with one 16v and the alt everytime i hit i drop to 11.4v, but i am running at .25ohms

Good to know they will take .25 ohms. We are running an 802SX as well. Our set up was droppping to 11V very quickly on burps at only a 1 ohm load with six batteries. They are really hungry but do put out a ton of power. cheers

well i am thinking about running my 802 down to 0 ohm's with 6 xl 12's if 4 don't get me where i want.

bigbass140 wrote:

Lilredtiva wrote:

bigbass140 wrote:

possible.

i am running 4 ma xl12's on one ma 802 sx 4400, with a ohio 180 with external reg adjusted to 17v running 1 kinetik 16v and i have 3 more on the way. with one 16v and the alt everytime i hit i drop to 11.4v, but i am running at .25ohms

Good to know they will take .25 ohms. We are running an 802SX as well. Our set up was droppping to 11V very quickly on burps at only a 1 ohm load with six batteries. They are really hungry but do put out a ton of power. cheers

well i am thinking about running my 802 down to 0 ohm's with 6 xl 12's if 4 don't get me where i want.

man i havnt seen a MA go below .5 with out trouble mine would act up at .7 and that was rollin up

The_Rowlands wrote:

man i havnt seen a MA go below .5 with out trouble mine would act up at .7 and that was rollin up

never had any trouble at .5 on any of the high current series. i know that on the class d series unless you mod them most of them were not able to go below 2 ohms without hitting the overload.

i have been running ma audio high current series since about 05 and have had probally 10 of there amps and probally 20 subs. never had any problems.

bigbass140 wrote:

well i am thinking about running my 802 down to 0 ohm's with 6 xl 12's if 4 don't get me where i want.

Let me know how that 0 ohm load works out for ya???

TeamSpead-Kenny wrote:

bigbass140 wrote:

well i am thinking about running my 802 down to 0 ohm's with 6 xl 12's if 4 don't get me where i want.

Let me know how that 0 ohm load works out for ya???

i want to know to damn. affraid

TeamSpead-Kenny wrote:

bigbass140 wrote:

well i am thinking about running my 802 down to 0 ohm's with 6 xl 12's if 4 don't get me where i want.

Let me know how that 0 ohm load works out for ya???

well i have completly decided on that yet, if i do i need some more subs.

my thinking is go big or go home. if i burn an amp it won't be the first. i know people that use to run the old school autoteks down to .25 ohm all the time yes the burned many of them but they accomplished what they wanted. this is my thinking if i burn the amp, but take 1st why not.

We're only looking at running about .5 ohms. So hopefully everything will cooperate.

As long as I have been in this sport I have never heard of anyone running there amp wired at 0 Ohm.

Novice Contributor Number of posts: 51 Age: 28 Registration date: 2008-01-29

yeah I didn't think that was possible either. Um I'd say let's try and blow some stuff up right? I don't even understand why you'd wanna put your amp through that kind of stress. I mean .25 is prolly hard enough. Half of that and then half of that? Good luck with the warranty on that amp.

Well I ordered my 2 HK2000d's, a 200 amp alt, and some more 0 gauge wiring for a dual run to the back. So I'll update when I get it all in. I just hope to see a 150. My Db had me around 147 on my audiocontrol mic.

kinda like the guy that wanted me to order him kickers quad 0 ohm subs....lol

eloudazztro91 wrote:

yeah I didn't think that was possible either. Um I'd say let's try and blow some stuff up right? I don't even understand why you'd wanna put your amp through that kind of stress. I mean .25 is prolly hard enough. Half of that and then half of that? Good luck with the warranty on that amp.

it's already out of warrenty. you know i look at it this way i have dumped so much money into getting loud since i started back in 96, and i have smoked amps, seperated voicecoils, and burnt voicecoils why not try it.

» Best Car Audio Brands?
» Good old Rugby
» Good morning all
» Very good fight
» Jim Skelton - The long good-bye

2 MA Audio HK2000D's strapped on 2 HK15d2's. Any good?

2 MA Audio HK2000D's strapped on 2 HK15d2's. Any good?

Similar topics

Similar topics