Rules

Lates SPL and SQ rules are up on the site today.

ralph i sent ya an emal few days ago. the other company changed the rules for unlimted amout of dyanamat and spray foam in front of the b pilar as long as oem panels remain and oem look . is this allowed in the mod class in usaci also??

A friendly look at the rule book and you will find that there are no limits to the amount of deadener as long as the oem panels fit normally and the windows can function (roll up and down) normally.

Hey ralph i thought it's have established several times now that the amp protest limit is 130% not 120%?

It still says 120% and has for over a year now since you guys have said it is 130%.

Please update it so people know what they are paying $300 for.

So bed cuts are now legal for pro stock??? That's what It looks like.......humm pro stock should be interesting

when the name change coming lol

Lol....pro stock cut up.....pro stock modified...lol

i wa thinking UDRAG lol

i see making both orgs as combinable as they can being a good thing for them, but its still just 2 orgs combining

So pro stock allows blow thru's on the s-dimes???

It’s all very funny but the fact is there are a large number of consumers out there who have no place to play in USACI because they are forced into modified class where they are destroyed by walls of woofers. We made the change to make room for more cars and more competition. The attendance in Pro Stock leaves room for a few more cars.

If these new rules are like another organization and that offends anyone I apologize. I wrote the new guidelines without reference to any other org or their rule book.

We do need to change the name and next year it will be called Mod Limited. We left the pro stock name so as to make the change over less confusing. This was all put in motion at the members meeting and has been waiting on the new SQ rules so they could be released together. I am open to ideas or suggestions anyone may have.


Thanks for all the constructive input there Jeff. A pleasure as always sir...

FUZ-T.C.C.-HK wrote:

So pro stock allows blow thru's on the s-dimes???

yes sir.

sanman wrote:

i wa thinking UDRAG lol

i see making both orgs as combinable as they can being a good thing for them, but its still just 2 orgs combining

If it means more competition and more participation it is good for everyone. You are correct.

I think its a good idea.......I like the it. There are some guys with bed cuts doing some 60s so it should be interesting

Ok I still see the 36" rule for the mini's is this still in effect or was it overlooked?

mod limited is a lame ass name.

pro stock no wall sounds better. even mod no wall sounds better.

[quote="hunterw"]mod limited is a lame ass name.

pro stock no wall sounds better. even mod no wall sounds better.[/quote



AGREED 100%


And yes i need to see the 36" rule gone if dem vans are gonna be in it now..... Please and thank you Ralph those are the only suggestions i have let get er done

Jimbo check out the rules the 36" rule is already gone.

"EXCEPTIONS: Pickup trucks with the rear of the cab and/or front of the bed cut out in order to
allow speaker or box placement in the truck bed are allowed in the this division. Any cut must not
exceed the overall height of the bed or the vehicle window line, whichever is lower. In these
vehicles the floor of the truck bed may not be lowered or cut. Wheel wells must be OEM. Vehicles
using the bed of the a truck for speaker enclosures may use the entire bed area."

well maybe not, that say if your box is in the bed you can use the whole bed, but doesnt specify anything in the ps rules about if the box is not in the bed, except for the rule that says ps follow stock except you can do anything behind the b-pillar

now you could pull it from that and make a case that yes you can uses all of the bed, because it is behind the b-pillar, so long as no other rules are violated.

"PRO STOCK – No Wall
This division uses the Stock rules with the exceptions as noted below.
“PRO” and “CONSUMER” competitors as defined previously in this book will be allowed in Pro
Stock.
Modifications:
Modifications will be allowed to the interior of the vehicle below the window line and behind the
“B” post. Factory panels above the window line must remain in tact. No modifications will be
allowed to the interior of the passenger compartment forward of the “B” pillars. The floor, ceiling
and dashboard must be OEM. Speakers larger than 8" and any speaker being used for SPL must
be located only behind the “B” pillars. The speakers and enclosure must not protrude beyond the
leading edge of the “B” pillars or above and imaginary line from the lowest window line of the
vehicle to the next lowest window line of the vehicle. This applies to all vehicles including cargo
vans and SUV’s. No modifications will be allowed to the exterior of the vehicle and all portions of
the system including batteries must remain inside the vehicle. Inside the vehicle is defined as
inside of the factory bodylines, roof, and floorboard. Equipment in or on trailers, hitch racks,
luggage racks and so on will not be permitted. No portion of the enclosure or audio system will
be permitted to be located outside of the vehicle,"


yeah jimbo read the whole thing, it says anything goes behind the b-pillar and inside the factory body line and the bed is inside the factory bodyline so i say yes.

No im looking at it as minis with boxes in cab not in bed cant use all of bed ...... So all i have to do is do a cut out extend the enclosure about an 1 inch into bed and whallllla , i then have the enclosure in the bed and can use the rest for amps and batteries..... There ya go


Now instead of all this crap on 36" rule only if enclosure in bed we could limit number of batts to 30 in unlimited and 20 in 601-1800 and 10 in 0-600 that could keep it from everyone cutting up there minis and then having to buy a ton o batts what do you ps guys think...????

And that is kewl over in SQ there is a place for us SPL guys to play well moe the SB guys you get to take you spl score and go into sq lane and do just sound no install and no cap on your spl so you get all your score you do a 155 you get that then go do you sound and it goes on one score sheet..... And you dont have to pay for a full price sq run you get it for half as long as you are in a spl class cudos on this fo sho

5 batteries limit? I like it!

NOOOOOOOOOOOOOO



Now your gonna have the masses all worked up bosss man....LOL


Honestly that would sucketh the ole competition balllz....hehe

I don't want to cut my truck ! But I would like to run 40 batts in pro-stock- no-wall-mod limited 1801 +

USACI wrote:

5 batteries limit? I like it!

nice

Look here mr man take your crx and hushhhhhhhh lol ........ This wont be a crx class bro so i doubt he was serious about the 5 batts bro....

How you been fool?

i like limiting the batts 10 i see 5 noooooooooooooooooooooooo

10 in 0-600 you mean ya fizzzzzzzzzzzuckstick....lol



if its limited to small amount of batts then i say get rid of the 36" rule for minis without cutouts ..... But if i need i will cut and do what i said.....Now that i think of it i could also brace it alot better once i cutout and brace the hell out of it more sturdy than what it was ....

Cutout here i come watchout boysssssszzzzzz

Yea 10 in trunk would be cool!

Stingraysevenout wrote:

10 in 0-600 you mean ya fizzzzzzzzzzzuckstick....lol



if its limited to small amount of batts then i say get rid of the 36" rule for minis without cutouts ..... But if i need i will cut and do what i said.....Now that i think of it i could also brace it alot better once i cutout and brace the hell out of it more sturdy than what it was ....

Cutout here i come watchout boysssssszzzzzz

I will watch out.....you with power tool and a blunt!