Nuboot trailblazer quest to 155

So here is my current build log still got wrapping deadening and more bracing then rebuild my amp and battery rack

I kinda rushed to make it to the soundoff. And during my burp I blew a sub

Lookin good!
What kind of numbers you getting with it ?

Well right now I'm just sitting at 150.3 hopefully by the time I put my fourth sub back in and make some adjustments hopefully get up to 151-152 then take it from there

So I'm sitting here thinking of what to do. And I think imma change the tuning in my box. So what's the best way to cut aeros

i would go from those aeros to slot port. aeros are good for like small hatchs and you can do a crx style box but suvs like explorer, trailblazer, blazer, expidition i would suggest slot port. still sub up port back. what are the powerbass 3ks wired to? i would think this setup is good for 153-155s on a burp and around 152+ sb.

There wired down to. 5 each

its either in the box or the wiring. you made sure all your grounds ohmed out to 0 on a legit dmm?

What are you asking exactly I'm confused

take a dmm. Put it on ohm setting. touch one end of a ground with one lead and touch the other end of that same ground with the other lead and see what the resistance in the ground is. That will tell you if your grounds are good. they should read 0

all my grounds are running from the front battery. but why did you bring that up

that would hurt your score alot if your grounds have resistance in them. and you said you were looking to get louder so i just threw an option out there. theres plenty of things to look into whenfine tuning to get louder. i went from like a 152 to a 154 with just tweeking and grounds and all the small things

o ok now i understand. well i got 4 runs from my neg on the front battery and since i got a sh1t ton of wire left i could do some frame grounds also

test how i mentioned it. you can have alot of grounds but if there shitty grounds i wont matter. and if you have time and money do a new box with slot port and a good amount of port like 20" per cube or so. that should put you up there nicely

I get what ur saying but imma work these.aeros since I spent 100 bucks on them.

Well there is a guy with a shop here with a bronco and he has his whole inside in rhino lined out. Now he says it eliminates the rattle and sort of acts like a bracing and such. Now I know herculiner may not be as strong but im thinking of doing something similar but with a twist this weekend.

ok have not been on here in a long time but i know the s-10/ blazers really well and know how to get them up to a 156 no wall really not going to happen the tunning ( cabon gain ) is 48 hz, i did 2 15s d2 and 8k of power and did the 156.3 all day every day with out breaking stuff off 6 batts and a 150 amp alt

Would love to hear more

for the most part was a basic box build i had 2 9500 dd d2 subs box rise was 2 ohm so with my rft4000 strapped was at 2 ohms did a double layer box glassed the inside port was 18 inches long and 7.5 wide and want to say over all box was 24 deep 18 tall triple layer front of wall i will have to dig threw my photo log and find ya some pics i have a u tube channel i want to say its mraho77 i have a few videos of it there and you can see my build

also foam all the dead spots of your panels and matt the Dung Pile out of it and will work well

ok thanks

dont hurculiner cuz some judges will call it illegal bracing

Damn it already did

nuboot69 wrote:

Damn it already did

On the box wont matter, on the vehicle could. Cover it wit some carpet or sumpin and never mention it again.

Lol

ok so i bought 2 more pb xa3000d so now i am sitting at 4. my last 4 batteries will get ordered at the end of the month along with some deadener that Alan put me. time to redesign my box and i will be even closer to my goal. now i just have to wait two months to start my build

Are You Still Goofing Around With The Aero's???? The Deeper You Put Them In The Box The Lower Your Tuning Will Be, But If You Put Them To Low You'll Choke The Box!!! Best Way Is Move Them Up An Inch At A Time And Burp To See Change In Frequency And Score Then Cut Them At Loudest Burp. But Like Basscort Said Its Better To Run Slotted Ports!!! 1st Box Subs Up Ports Back And Keep The Subs Closer, Move The Box Around In The Cab And Test To See Best Score Also Might Want To Turn The Box To See What Firing Into The Wells Do For You!!! 2nd Box I'd Do Would Be Subs Up Port Up And Again Move Box Back In Fourth And Spin It. After These Two Builds You Will Know What Works Best For Your Car And Current System Then Its Tuning And Tweaks From There!!! (Visors Down, Seats All The Way Forward And Leaned Back As Far As Possible. Some Little Things Go A Long Way In Some Vehicles!!!)