SUPER PORTWARS AND WORLD FINALS??

Will tubes be allowed this year in super portwars, we have notice that most people doing these 180s+ are using a sub and tube to the sensor, this does break a Usaci Rule but seems not to be enforced???

i thought there was no rules for super port... may be wrong though

nothing must interfere or cause possible damage to the sensor.

when your breaking past the foam of the sensor opening and going inside of the sensor box with a tube how can you not be chancing damage to the sensor?
only stating this because we got the sensor past 180 now but this only happens by going past the sensor foam into the sensor with a tube, we stopped playing that game when we felt the sensor box flex so much it could break open.

omg they dont do that they put the tube up to the sensor not in it

the hose they use isnt small enough to fit insinde the hole where the foam is.

the numbers you guys claim always have been false, and always will be, and there is always nothing but excuses man time to man up and be real.

sanman wrote:

omg they dont do that they put the tube up to the sensor not in it

the hose they use isnt small enough to fit insinde the hole where the foam is.

the numbers you guys claim always have been false, and always will be, and there is always nothing but excuses man time to man up and be real.

Well this should be no problem at finals, Usaci should have a sensor just for super port with foam on the sensor, if there is any marks of anything goning past the sensor that person should be DQ Quad has seen the tubes and reproduced it today, now we can hit 180s watch our number quad has only done 160s all year or less now watch what he brings, plus the Judge should hold the sensor if this is the case numbers should stay the same.

there isnt foam on the sensors i saw at finals.....

Talonesi wrote:

there isnt foam on the sensors i saw at finals.....

Thats the point, you loose a little with the foam, we had a brand new sensor with foam 177.7 tops put a hole in the foam 179 went past the hole 183.1

is it really hard to beleive some people are just louder than others no matter what we do there is always someone thats going to be bigger, better, louder, stronger, smarter

183.1 how the hell mine only goes to 183 tops and is way louder then 183

there are about seven tube tips we tried for that .1 again only going past the foam did this happen

and again as stated before just cause you cant seem to get it done does not mean others cant

i mean the meter wont go past 183

it should go to 200 mine does

hmmmm guess i should start spw again and try for 200,,,lol .

if anyone gots its u

sanman wrote:

and again as stated before just cause you cant seem to get it done does not mean others cant

so i need Quad to post some pictures??? your missing the point a Judge needs to watch what is being done at the sensor hole, if there is no rule on this then there is no problem we feel 183.1 will win at finals so it's all good

ya it should best ive seen is 183 by about 6 people. good luck..

rowland do you do this act to the sensor when you run it in super port man im woundering

here is what we did with the 10" and 600watts

see step up to a 15 like they do and wamm 183

that graph at the bottom loks kinda ummm suspiciouse

sanman wrote:

see step up to a 15 like they do and wamm 183

Yes the final 183.1 is with a 15"

i have a new sensor and that darn thing aint got no foam... ive seen three other sensors with no foam... mine has never done super port wars..maybe i have a weird one..never know.. and personally if you are doing it thru the foam and everyone else is what is the matter????

the point is past the foam to inside of the sensor, you go past the hole to the probe thats inside of the sensor.

if it does not damage the sensor... you said was the rule so there for if the foam is not there .... there is no damage if there is foam and it goes past that could be considered damaging the sensor.. and that is up to the judges at the begining of the show

all sensors last year at finals had no foam at all we all had a level playing feidl with them, and its the head jusdges decision if something is unsafe for the sensor or not. You see there are rules, and then there are rules that can revoke the rules ya dig

The_Rowlands wrote:

i mean the meter wont go past 183

You are right! Anyone can check this out by going to http://www.termpro.com/storefront/index.asp?Page=1

Below is the quote from the rules.

Quote :

SUPER PORT WARS DIVISION:
Microphone/sensor Placement:
Super Port Wars will use the Port Wars rules with the following exceptions:
Super port will not use the microphone/sensor globe and the sensor may be placed in any
location that it will fit into provided the location does not pose a threat to the safety of the
microphone/sensor.

sanman wrote:

that graph at the bottom loks kinda ummm suspiciouse

unplug your sensor from the box, does it everytime.

Navi wrote:

sanman wrote:

that graph at the bottom loks kinda ummm suspiciouse

unplug your sensor from the box, does it everytime.

That's how our super port graph looks... And we're very legit

my spw reads only my burp hrtz