Looking to make a custom amp rack cover out of 1/2" plexiglass and I'd like to find a place to cut my amp manufacturers name into the plexiglass, can anybody help me out?

I think Metamora products can do stuff like that now . But I am not sure !

Are you just looking to get the logo engraved, or the plexi cut in the shape of the logo?

You can actually get stickers made that look like it was etched or u can get a reverse sticker made tape it off and sand blast it they sell a small sand blaster at harbour freight everybody has one of those don't they????? It works on air just load it up with fine sand and ur good to go

really keith cause if so i am gonna go get me one here soon cause i an idea for a box for the wife's trunk tha twill look awesome if i can get my hands on one of those

I'm not looking to have a name engraved or the plexi cut into the shape of the logo, I want my amp manufacturers name cut out of the amp rack cover (plexi sheet).
Thanks for the quick replies guys.

In that case you can make a wood template of the cut out and use a top roler flush trimer on the router and do it your self.
I don't know a shop that would do that for you.

A machine shop with a CNC or water jet could. Not sure if you have any friends at these kinds of shops. Otherwise it can get pricy.

Here is a pic of one we did I know it might be hard to see but if u will pm me ur email I will send u the pic so u can zoom in and see the etchingings

The tahoe above just has regular stickers but u can't even tell and we did them on the back side of the plexi so it would live longer with all the cleaning u will do

I'd try the router idea but I don't want to ruin a piece of plexiglass, I want the piece to look perfect. There's got to be a place that can cut images into plexiglass somewhere.

If you want it perfect you might wanna listen to what mike said above ......CNC OR Waterjet is all that will work for what your looking for obviously they can even use those to make the plexy any shape logo or whatever you want.......

The way keith is saying is old school but it works but WILL NOT work for your project

Thought i would cover myself here kieth he is wanting like the 3D actuall where they cut 1/4 of the glass out with the design ... It looks sharp as shhit but is higher than girraffe pussssy

I want the image cut completely through the plexi.

But I'm old school lmao and I like giraffes wait a sec yea listen to Jimbo I'm used to people saying that's too high just for plexi haha

Kieth Im old school too bro...

As to the guy wanting the info..... Since you want it cut all the way through means i was on the right track with ya soooooo...If you find a shop with either of those i mention they can also cut it all the way through as well. If you cant find anyone Get with Chris Pate he can get your measurments and get it done over the phone for ya and only takes a week or so i believe i can get you his info that is who i and a TON of others use bro....


But again remember i said it was higher than girraffe pussssy so you dont get suprised bye the price but its worth every penny ... And yes kieth my customers think just the etching is too high as well BCS baby ...lol 4packs and RIP signs with da pop truck LOLOLOLOLLOLLOOL

Stingray, send me Chris' info if you would when you get a chance I'd really appreciate it.

that system was full on & rocking, i was looking for dam this kind of stuff for my civic,