chrisbaldelli Above Average Contributor
Number of posts : 559 Age : 39 Location : Houston, TX Registration date : 2008-11-30
| Subject: Optimal Port Area Sat Apr 24, 2010 5:47 pm | |
| I was hoping we could try to establish a correlation between the optimal port area, box size, and power.
The rule of thumb is 16 sq in of port for each cubic foot, but some people say "as much port as you can manage!"
What do YOU have in your SPL/SB/Daily setups?
Currently: 3cf, 105 sq in... that's ~35 sqin/cf power is ~1200w
Previously: 2.4 cf, 64 sq in... that's 27 sqin/cf This setup was louder than the current one. | |
|
nothingtooloud Novice Contributor
Number of posts : 161 Age : 41 Location : Maryville MO Registration date : 2008-12-21
| Subject: Re: Optimal Port Area Sat Apr 24, 2010 6:10 pm | |
| 14.25 cubes, 207 sq of port 3k | |
|
p_fitzpatrick Novice Contributor
Number of posts : 163 Age : 47 Location : Farmington, NM Registration date : 2009-04-10
| Subject: Re: Optimal Port Area Sat Apr 24, 2010 11:34 pm | |
| 2.4 cubic foot box, 92.25 cubic inches of port = 38.41 inches / cube | |
|
outsideshot23 Above Average Contributor
Number of posts : 638 Age : 37 Location : OK Registration date : 2009-09-13
| Subject: Re: Optimal Port Area Sun Apr 25, 2010 10:38 pm | |
| | |
|
chrisbaldelli Above Average Contributor
Number of posts : 559 Age : 39 Location : Houston, TX Registration date : 2008-11-30
| Subject: Re: Optimal Port Area Mon Apr 26, 2010 6:28 pm | |
| | |
|
Sponsored content
| Subject: Re: Optimal Port Area | |
| |
|