help me build a box

I put this in the wrong forum, sorry
I got all the beer you can drink, while we build a box. The box is for 2 solox10s in a 2000 ford mustang. I could actually build it myself, I have all the tools needed, but I cant figure out the whole port thing. So if someone could send me some plans, I could deposit some cash into their paypal account. The dimentions of the trunk is 15.25", height 34" width and 34" depth. The bad news is if I face the subs into the trunk, then I cant use the whole 34". One thing I know for sure is my car hates to be sealed off. I lost 2.5dbs by sealing off my car. So I got the sledge hammer out and tore it all out. When the car is sealed my frequency is 53hz, and facing back is 58hz. I want a box I can daily drive and pound, but for comps hit big numbers in SB1. So turned ~45hz give or take a few dbs. I could do a wall if thats what I have to do. I am trying to avoid that though. I'm trying to hit at least 150dbs. The system consist of 2 solox10s, and a SS XXX10000d, two 2400 kinetiks in the rear, a maxxlink (line driver), and a 250 amp alt. Big three is done and 2 runs of 2/0 gauge wires to the back. Any takers or designers want to help, Im in SA TX. Help a brother out.

one u need more batts for that amp

my voltage hasnt dropped below 12 at full blast. but when I finally hook up both subs and my voltage does drop, then I'll add a batt. Kinetik says I can run 5200watts just off of the kinetiks alone, and I still have the 800 amps from the front battery. So I should be good for 6000watts. I dont think the amp will be putting out much more than that. I can put another 2400 kinetik when I have to. thanks for the info, but I didnt ask if my electricals were any good. I asked for help on my box/wall. I dont want to get off on the wrong foot with anyone, I just wanted a little help with my box project.

I bought one of my kinetiks from you, and they are always for sale cheap, so I could always buy one later.

daddy_j wrote:

my voltage hasnt dropped below 12 at full blast. but when I finally hook up both subs and my voltage does drop, then I'll add a batt. Kinetik says I can run 5200watts just off of the kinetiks alone, and I still have the 800 amps from the front battery. So I should be good for 6000watts. I dont think the amp will be putting out much more than that. I can put another 2400 kinetik when I have to. thanks for the info, but I didnt ask if my electricals were any good. I asked for help on my box/wall. I dont want to get off on the wrong foot with anyone, I just wanted a little help with my box project.

more batteries...... .....jk

The best people i know to bulid a trunk is slumpinhonda or twisted image or mr. davis that is who i would try to contact.

u got a power hungry amp u need more jucie

again, I understand I might need more batteries, but unless you want to help me with my box situation, don't bother writing stupid stuff, that doesnt deal with my situation. Im trying to be nice but please stop talking about my batteries. PLEASE. Box help is all Im after at this point. Lets just pretend I have 10 2400kinetiks.

u probably dont need 10 2400's.....lets say u have 6???????......jk

ibbangin wrote:

u probably dont need 10 2400's.....lets say u have 6???????......jk

thats funny

heres what I came up with, some let me know if its even worth the time to build it. oh and I have 2 more 2400 kinetiks on there way. I might need more, but I'll cross that bridge later. box time

thats a 15" on the right (height)

no its 5

I got a 149.2dbs with that box above. 2 ten solox