I have an 04 Chevy 4 Door. I also have 2 Xtant 1001X. Any suggestions on what subs I can install under the rear seat to get the deepest loudest sound that will carry outside the truck? I am not a pro so be easy on me.
I also have 2 JL 12W7's I'm not using if you have any suggestions on how I can get one of them in that same truck will keeping all the seats installed?

You are better off putting some shallow mounts behind the seat....you'll get more airspace than trying to keep it under.

what he said.. i installed 2 Kicker CVTs in a 05 chevy crew cab on a hifonics 600 and it sounded very nice.. clean and deep.. very suprised actually..

hell cut a big hole in the floor and weld in a metal box and throw a set of 15 in there....

so yall think the kickers will fit behind the back seat? not much room back there. will the sound carry to the front and outside the truck?

them cvt's are nice they will fit

Will they handle very much of an Xtant 1001?

we got the kicker pre fab boxes when my buddy ordered them.. they fit... i suggest you build your own and port it though..

I am not much of a wood worker. are the prefab boxes ok? will they work as good? can the prefab be ported as needed?

GO SEE WESSELY KENNARD THERE IN HUNTSVILLE HE CAN DO YOU GOOD.HE IS THE BEST IN THAT TOWN TO MAKE YOUR TRUCK LOUD

i took a prefab 2 12 box and glassed the inside capped one end off and put a 4 inch by 4 inch internal port 14 inch long.i put a dd 2500 12 ' sub in it on a dd M1A.slammed hard.you can put just about any sub in that box. try it out.box should cost around 65 to 85 dollars.a little resin and enough wood for the port and cap. let me know how it turns out.

yeah i know who your talking bout. does he carry good quality equip? or stay with the kickers?
I want the deep low bass, not just the volume.

HE IS A DD DEALER AND DB DRIVE YOU CAN PUT UP TO A PLAT 12 BY DB DRIVE OR A DD 2500 . IF YOU WAS GONNA GO WITH KICKER USE A KICKER L7 10 OR 12.ONE WOOFER WILL HIT HARDER THEN 2.

Try some RE audio SR subs. We have had a lot of luck using them in trucks. They handle a lot of power and work well in almost any box.

ive seen alot of 4 door chevy trucks were they take out the seat mounts from under the seat and replace them with a custom built box with the seat mounted on top of it. looks good to with some plexi