bass knobs

Pro Contributor Age : 26 Joined : 28 Feb 2008 Posts : 515

sup guys have a quick question. i have 2 hifonics 2006 both or wired to one ohm on 2 power hx2 10's. i was wanting to run both amps not strapped but one amp each sub and am wanting to use the bass knob. i have the amp in master and slave mode and running one remote. now when i have the remote turned down one sub is playing harder than the other and when i turn it up they both play the same. keep in mind i have the gain on one amp higher than the other an that one that is higher is the one that is playing harder. now my question is , is my setup okay or do i have to buy a y split cable to run to both amps to keep the confusion down? thanks guys

david

Subject: Re: bass knobs Sat Apr 12, 2008 4:47 pm

wow.... gain match the amps
_________________
db Drive
MMATS

Pro Contributor Age : 20 Joined : 23 Jun 2007 Posts : 686

true that...
_________________
Andrew Phinney

Team Audiohype
www.teamaudiohype.com
Team Revolution
www.rdaudio.net

07 stock 0-600 runner-up
07 prostock 3000+ world champs
pstock 0-600 legal world record holders
pstock 0-600 outlaw world record holders

car audio isnt a hobbie...it is a lifestyle

Subject: Re: bass knobs Sat Apr 12, 2008 10:24 pm

x3
_________________
Darren Laffan

Team Revolution
Team Kinetik

Team Heinz
stock 0-600
155+ club
3x State champ

http://www.myspace.com/darrenlaffan

Subject: Re: bass knobs Sun Apr 13, 2008 12:47 am

yup we they said
_________________
Tim Dougherty
S.W.A.T. Team
Street Beatz
Team Revolution
WR stock 3001+ 155.1
WR Stock 1801-3K 156.9
2007 WF 160.9
2008 Stock 0-600, 601-1800, 1801-3k, and 3K+

TEAM PIE GOTTA EAT YA SOME

Subject: Re: bass knobs Sun Apr 13, 2008 8:52 am

yeah match the gain but also i think i uderstood you correctly to wanting to use the bass knob like at the drivers seat, if thats what you meant you can take a phone line splitter and run both amps in and then run one line to your knob and it will control both at same time with the one knob.
_________________
2007- Region 2 Points Champion

Team Ground & Pound

Pro Contributor Age : 26 Joined : 28 Feb 2008 Posts : 515

^^^^^^^i like that idea and was going to try it but on these new hifonics amps they use bigger ends than the regular phone one that some others use. its more like a intranet line but that is a good idea on my last amp that would have worked great. thanks guys

david

Subject: Re: bass knobs Sun Apr 13, 2008 4:16 pm

ethernet.... RJ 45 i believe
_________________
db Drive
MMATS

Advanced Contributor Joined : 05 Mar 2008 Posts : 444

i suggest radio shack for that part. they normally have the bigger cable patches as well as the small patches
_________________
Evan Hopkins
Team Tragic Sounds

Subject: Re: bass knobs Wed May 07, 2008 10:59 am

I'd double check the wiring on any cables you buy for it. Make sure the wires are lined up exactly the same way at both ends of the cable before you hook them up. My Rockford EPX2 has a cable something like your talking about and I thought it was a phone cable, but it's not and it cost me $200 to fix the damage caused by the wrong cable. Some cables are what they call "flipped", and some aren't. A flipped cable reverses the order of the wires between the two connectors, just make sure the cable you have now and the one you buy are exactly the same.
_________________
www.Myspace.com/NESPL